7-8 Sending Faxes Chapter 75 Press Start (Start/Scan) to begin scanningfor sending, or if you used speed dialling, waita few seconds for the unit to begin scanningautomatically.• If you prefer the unit never to scan a documentautomatically after a few seconds, disable theTIME OUT setting. (→ p. 14-6)• To cancel sending once dialling has started, pressStop then T. (→ p. 7-10)n• You can scan up to 30 different documents for memory sending.• When an error occurs during sending, the document is automatically deleted from memory, evenif it was not sent completely.• If you attempt to send a colour document to a fax machine that does not support colour faxing,the document will not be sent and the LCD will display TRY AGAIN IN B&W (TRY AGAIN INB/W). Try sending again in black & white. For the MultiPASS C75/ FAX-B215C, you can enablethe COLOUR DIRECT TX setting (→ p. 14-6) that converts colour faxes to black & white if theother party’s fax machine does not support colour faxing, thus enabling you to send colourdocuments to any fax machine without an error occurring.Manual Sending Via the HandsetManual sending via the handset allows you to talk to the other party before sending adocument. This method is useful if the other party must manually set their fax machine toreceive before they can receive a fax.Follow this procedure for manual sending via the handset:nFor this mode, you need to connect the optional handset, a telephone, or an extension phone toyour unit. (→ p. 2-6)1 Open the document tray (MultiPASS modelsonly).2 Adjust the document feed lever for thedocument you are loading. (→ p. 4-2)3 Prepare the document and load it, face down,in the ADF. (→ p. 4-4)• For colour sending, press Colour/B&W (Color/B&W) to turn on its light. (→ p. 7-3)• To adjust the resolution and contrast, → pp. 7-4,7-5.(Currently used memory)(Standby to scan)MEMORY USED 0%DOCUMENT READYEx:
