135Preparing to Print6 Playback the image.Press the <x> button.X The image will appear, and the <w>icon will appear on the upper left toindicate that the camera is connectedto a printer.X The <l> button lamp will light inblue.wPictBridgeThe camera cannot be used with printers compatible only with CP Director Bubble Jet Direct.When connecting the camera to the printer, do not use any cable otherthan the interface cable provided.If there is a long beeping sound in step 5, it indicates a problem with theprinter. To find out what’s wrong, do the following:Press the <x> button to playback the image and follow the stepsbelow.1. Press <0>.2. On the print setting screen, select [Print].The error message will be displayed on the LCD monitor. (p.142)You can also print RAW and sRAW images taken by this camera.If you use a battery to power the camera, make sure it is fully charged.With a fully charged battery, printing up to about 7 hours is possible.Before disconnecting the cable, turn off the camera and printer first. Pullout the cable while holding the plug, not the cord.For direct printing, using AC Adapter Kit ACK-E2 (sold separately) topower the camera is recommended.
