140wPrintingIn step 4 on page 138, select the printingeffect. When the <e> icon is displayednext to <z>, press the <B>button. You can then adjust the printingeffect. What can be adjusted or what isdisplayed will depend on the selectionmade in step 4.BrightnessThe image brightness can be adjusted.Adjust levelsWhen you select [Manual], you can changethe histogram’s distribution and adjust theimage’s brightness and contrast.With the adjust levels screen displayed, pressthe <B> button to change the position ofthe <s>. Turn the <5> dial to freely adjustthe shadow level (0 - 127) or highlight level(128 - 255).kBrightenerEffective in backlit conditions which can make the subject’s face lookdark. When [On] is set, the face will be brightened for printing.Red-eye corr.Effective in flash images where the subject has red eye. When [On]is set, the red eye will be corrected for printing.e Adjustment of Printing EffectsThe [kBrightener] and [Red-eye corr.] effects will not show up on thescreen.When you select [Detail set.], you can adjust the [Contrast],[Saturation], [Color tone], and [Color balance]. To adjust the [Colorbalance], use <9>. B is for blue, A is amber, M is magenta, and G isgreen. The color in the respective direction will be corrected.When you select [Clear all], all the printing effect settings will be revertedto the default.
