139wPrinting5 Set the date and file numberimprinting.Set as necessary.Turn the <5> dial to select <I>,then press <0>.Turn the <5> dial to select thedesired setting, then press <0>.6 Set the number of copies.Set as necessary.Turn the <5> dial to select <R>,then press <0>.Turn the <5> dial to select thenumber of copies, then press <0>.7 Start printing.Turn the <5> dial to select [Print],then press <0>.X The <l> button’s blue lamp willblink and the printing will start.To print another image with the same settings, select the image and justpress the <l> button lit in blue. Trimming will not be applied to 1-copyprinting.The [Default] setting for printing effects and other options are theprinter’s own default settings as set by the printer’s manufacturer. Seethe printer’s instruction manual to find out what the [Default] settings are.Depending on the image’s file size and image-recording quality, it maytake some time for the printing to start after you select [Print].If you did “Adjusting the rotation angle” (p.141), the printing time maytake longer.To stop the printing, press <0> while [Stop] is displayed, then select[OK].