148Before connecting the camera to the personal computer, be sureto first install the EOS DIGITAL Solution Disk software (in theCD-ROM provided with the camera) in the personal computer.1 Connect the camera to thepersonal computer.Turn off the camera and use the interfacecable that came with the camera.When connecting the cable plug tothe camera’s <D> terminal, thecable plug’s <D> icon must face thefront side of the camera.To the personal computer’s USB port,connect the plug on other end of the cable.2 Set the camera’s power switch to<1>.When the program selection screenappears on the personal computer,select [EOS Utility].When the camera model selectionscreen appears, select your camera’smodel.X The [EOS Utility] screen will appearon the computer, and the directtransfer screen will appear on thecamera’s LCD monitor.d Transferring Images to a Personal ComputerPreparation for Image TransferShooting will be disabled while the direct transfer screen is displayed.If the [EOS Utility] screen does not appear, see “Software InstructionManual” in the CD-ROM.Before disconnecting the cable, turn off the camera first and pull out thecable by grasping the plug (instead of the cord).
