138wPrinting4 Set the printing effects.Set as necessary.Turn the <5> dial to select the itemon the upper right, then press <0>.If the <e> icon is displayed next to<z>, the printing effects can alsobe adjusted. (p.140)Next, turn the <5> dial to select thedesired printing effect, then press<0>.* The screen display may differ depending on the printer.* When the printing effects are changed, the changes will be reflected on thescreen. However, the actual result of the printing effects might look differentfrom what you see on screen. The screen only shows an approximate rendition.This also applies to [Brightness] and [Adjust levels] on page 140.Item DescriptionEOff Same as the printing characteristics turned “On”. No automaticcorrection will be performed.EOnThe image will be printed according to the printer’s standardcolors. The image’s Exif data is used to make automaticcorrections.EVivid The image will be printed with higher saturation to producemore vivid blues and greens.ENR The image noise is reduced before printing.0 B/W Prints in black-and-white with true blacks.0 Cool tone Prints in black-and-white with cool, bluish blacks.0 Warm tone Prints in black-and-white with warm, yellowish blacks.zNatural Prints the image in the actual colors and contrast. No automaticcolor adjustments will be applied.zNatural MThe printing characteristics are the same as the “Natural”setting. However, this setting enables finer printing adjustmentsthan with “Natural.”EDefault The printing will differ depending on the printer. For details, seethe printer’s instruction manual.
