141wPrintingYou can crop the image and print onlythe trimmed portion as if the image wasrecomposed. Do the trimming rightbefore printing. If you set the trimmingand then set the print settings, you mayhave to set the trimming again.1 On the print setting screen, select [Trimming].2 Set the trimming frame size, position, and proportion.The image area within the trimming frame will be printed. The shapeof the trimming frame can be changed with [Paper settings].Changing the trimming frame sizeWhen you press the <u> or <I> button, the size of thetrimming frame will change. The smaller the trimming frame, thelarger the image magnification will be for the printing.Moving the trimming frameUse <9> to move the frame over the image vertically orhorizontally. Move the trimming frame until it shows the desiredimage area or composition.Rotating the frameEach time you press the <B> button, the trimming frame willtoggle between the vertical and horizontal orientations. This enablesyou to create a vertical-oriented print from a horizontal image.Adjusting the rotation angleBy turning the <5> dial, you can adjust the angle of the imagerotation by ±10 degrees in 0.5-degree increments. After rotation,< > will change to blue.3 Press <0> to exit the trimming.X The print setting screen will reappear.You can check the trimmed image area on the upper left of theprint setting screen.Trimming the Image
