32<2> : The camera is turned off and doesnot operate. Position for when youdo not use the camera.<1> : The camera operates.<J> : The camera and <5> operate.(p.34)The shutter button has two steps. You can press the shutter buttonhalfway. Then you can further press the shutter button completely.Pressing halfway (0)This activates autofocusing andautomatic exposure that sets the shutterspeed and aperture.The exposure setting will be displayedon the LCD panel and in the viewfinder.In the Creative Zone modes, pressingthe <p> button will be the same aspressing the shutter button halfway.Basic OperationPower/Quick Control Dial SwitchShutter ButtonWhenever you set the power switch to <1/J> or <2>, the sensorcleaning will be executed automatically. During the sensor cleaning, theLCD monitor will display a logo.To save battery power, the camera turns off automatically after about 1 minuteof non-operation. To turn on the camera again, just press the shutter button.You can change the auto power-off time with the menu’s [5 Autopower off] setting. (p.42)If you set the power switch to <2> while the image is being recordedto the CF card, [Recording ...] will be displayed and the power will turnoff after the CF card finishes recording the image.
