Checking the Status of Copy, Fax, Print and Report Jobs11-2System Monitor11Confirming Transmission Results and SendingReservationFollow the procedure below to confirm the sending or receiving results and sending reservation(automatic redialing and delayed sending).1 Press [System Monitor] repeatedly until is displayed.2 Press [ (-)] or [ (+)] to select <2.TX/RX RESULT> ➞ press [OK].The sending result and reservation can be confirmed by checking the sending time, or fax number.3 Press [ (-)] or [ (+)] to confirm the sending result and reservation.NOTE• To return to standby mode, press [Stop/Reset].• If you perform the procedure above when there is no sending reservation and transmission jobs, <NO DOC.STORED > will appear, and the display will return to the display shown in step 2.Deleting a Fax JobFollow the procedure below to delete the documents waiting to be sent by automatic redialing ordelayed sending.1 Press [System Monitor] repeatedly until is displayed.2 Press [ (-)] or [ (+)] to select <3.DELETE DOCUMENT> ➞ press [OK].3 Use the numeric buttons to enter the transmission number of the fax job you want to delete ➞ press [OK].NOTEYou can check the transmission number of the reserved fax job by printing the DOCUMENT MEMORY LIST.(See p. 12-10.)15:34 0010 TX STNDBY[ 01]CANON USATX RX NO. 0055 ➞ OK TO DELETE?< YES NO >
