Setting Up Polling Sending8-5Setting Up and Using Polling83 Adjust any necessary settings for your document.• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)4 Open One-Touch Speed Dial panel ➞ press [Polling].5 Press [OK].The document is scanned into the polling box.Changing the Polling Box SettingsFollow this procedure to change the settings of a polling box.1 Press [Menu].2 Press [ (-)] or [ (+)] to select <4.FAX SETTINGS> ➞ press [OK].3 Press [ (-)] or [ (+)] to select <6.POLLING BOX> ➞ press [OK].4 Press [ (-)] or [ (+)] to select <2.CHANGE DATA> ➞ press [OK].5 Enter the password (up to 7 digits) using the numeric buttons ➞ press [OK].If you have not previously set a password, skip this step, and go to step 6.For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.6 Press [ (-)] or [ (+)] to display the setting you want to change ➞ press [OK].To change the settings for an item, follow the same procedure you used for the initial setup of the polling box.(See “Setting Up a Polling Box,” on p. 8-3.)NOTETo change the password, you have to first enter the old password (it is not displayed as you enter it)➞ press [OK]➞ enter a new password (it is displayed as you enter it)➞ press [OK].7 When you are finished making changes, press [Stop/Reset] to return to standby mode.CHANGE DATAPASSWORD ******* ➞ CHANGE DATA1.FILE NAME
