Loading Paper4-10Paper Handling4IMPORTANTIf the slide guides are not adjusted correctly for the size of the envelope, the quality of your printouts may beadversely affected.2 Insert the envelope straightly in the multi-purpose feeder with the print side up and the right edge (i.e.,closer to the stamp) first.If the envelope to be loaded has a flap on the short edge, this edge must enter the machine first. Not loading itthis way will result in a paper jam.3 Specify the paper size.❑ Press [Menu] ➞ press [OK].❑ Press [ (-)] or [ (+)] to select <2.MP TRAY> ➞ press [OK] twice.❑ Press [ (-)] or [ (+)] to select ➞ press [OK].❑ Press [ (-)] or [ (+)] to select the appropriate envelope type ➞ press [OK].NOTEYou can select <FREESIZE > instead of < ENVELOPE> as the paper size. When < FREESIZE> is selected, youcan specify vertical and horizontal sizes of the envelope in the following ranges:- < VERTICAL SIZE >: 127 mm to 356 mm- < HORIZONTAL SIZE >: 76 mm to 216 mm4 Specify the paper type.❑ Press [ (-)] or [ (+)] to select or ➞ press [OK].❑ Press [Stop/Reset] to return to standby mode.
