| 
Redialing 6-11Sending Faxes6RedialingManual RedialingTo redial the last number dialed with the numeric buttons, press [Redial/Pause].To cancel manual redialing, press [Stop/Reset] ➞ [ (-)].Automatic Redialing With Memory SendingWith memory sending, you can set the machine to automatically dial the fax number again if thereceiving fax machine does not answer or if the line is busy. You can also control how many times themachine will redial the number and how long it will wait between dialing attempts. See “Setting UpAutomatic Redialing*,” on p. 6-11.Canceling Automatic RedialingIf you press [Stop/Reset] when waiting to redial, the LCD displays standby mode but you are still inautomatic redialing. To cancel redialing while the machine is waiting to redial, follow the proceduredescribed in “Deleting a Fax Job,” on p.11-2. To cancel while the machine is redialing, do the following:❑ Wait until the machine begins redialing.While the machine is waiting to redial, the LCD displays .❑ Press [Stop/Reset] ➞ [ (-)].NOTEThe machine can print a list of document stored in memory (DOCUMENT MEMORY LIST), along with thetransaction number of each document. The document waiting to be sent using automatic redialing will be listed as< TRANSMIT >. To print the list, see “Document Memory List,” on p. 12-10.Setting Up Automatic Redialing*You can set up the following options for automatic redialing:• Whether or not the machine redials automatically• The number of times the machine attempts redialing• The time interval between redialing attempts* The default settings for the auto redial feature vary depending on the country. For details, see Appendix C, “DefaultSettings for Each Country.” |
