CHAPTERCleaning the Machine 14-114Maintaining Your MachineYour machine requires no maintenance other than periodic cleaning, and replacing of the toner cartridge as needed.Cleaning the MachineClean your machine regularly to keep it in good operating condition.NOTEFollow these precautions whenever you clean the machine:- When cleaning the machine's exterior or the scanning glass, be sure to disconnect the power cord before cleaning the machine.- When the power cord is disconnected, any documents stored in memory will be erased if you leave the machine unplugged for 1 hour ormore. Be sure to plug the machine in after cleaning to avoid this happening. If appears in the LCD display, followsteps on p. 7-6 to print out the document.- If you disconnect the machine while it is waiting to send a document, you will have to set the machine to send your document again onceyou finish cleaning the machine. However, when you have set a document for delayed transmission, the machine holds the document inits memory for about 1 hour.- Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the components or generate static charges.- Never use volatile liquids such as thinner, benzene, acetone, or any other chemical cleaner to clean the interior of the machine; thesecan damage the machine’s components.Cleaning the Machine’s Exterior1 Disconnect the power cord.2 Wipe the machine’s exterior with a clean, soft, lint-free cloth moistened with water or diluted dishwashing detergent solution.CAUTIONNever use thinner, benzene, alcohol, or any other organic solvent to clean the machine, as these can damage the machine’ssurface.3 Plug the power cord back in.
