Sending Faxes6Sending Documents6-8Manual Sending Via the HandsetUse manual sending when you want to talk to the other party before sending a document, or if the other party does nothave a fax machine that can receive automatically.Follow this procedure for manual sending:1 Load the document in the ADF.For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” onp. 6-1, and “Loading Documents in the ADF” on p. 6-3.2 Press [FAX].If you are already in the Fax standby mode, you can skip this step.3 Adjust any necessary settings for your document.• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)4 Pick up the handset.5 Dial the other party’s fax/telephone number.For details on the different dialing methods, see “Dialing Methods,” on p. 6-6.6 Talk through the handset to the other party.If you hear a high-pitched signal instead of the other party’s voice, go to step 8.7 Ask the other party to set their fax machine to receive faxes.8 When you hear a high-pitched signal, press [Start] hang up the handset.NOTETo cancel manual sending, press [Stop/Reset].
