Setting Up Your Machine2Energy Saver Mode2-14Energy Saver ModeThe machine provides an energy saver function. When no operations are performed for about 5 minutes, the machineautomatically enters the energy saver mode.NOTE• The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30 minutes. You can also turn off theenergy saver function. (See Chapter 15, “The Menu System.”)• The energy saver function does not activate when the machine is in the following status:- When printing out copies, faxes or other pages- When sending or receiving faxes- While a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In Use/Memory indicatorlights up- When paper jams occur- When an error code appears and the Alarm indicator flashes- When no paper is loaded in the cassetteSetting the Energy Saver Mode Manually1 Press [Energy Saver].The LCD is turned off and [Energy Saver] lights up.NOTERight after the machine is restored from the energy saver mode, or right after copying finishes, wait about 2 seconds before pressing[Energy Saver].Restoring from the Energy Saver Mode1 Press [Energy Saver].[Energy Saver] goes off and the machine enters standby mode.NOTEThe machine can be restored from the energy saver mode immediately. However, it may vary according to room temperature andcircumstances.
