Paper Handling4Loading Paper 4-56 Insert the cassette into the machine.NOTEIf you do not completely insert the cassette into the machine, paper jams may occur.Do not load paper from the rear of the cassette.7 Specify the paper size and type.❑ Press [Menu] [Set].❑ Press [ (-)] or [ (+)] to select <1.CASSETTE> press [Set] twice.❑ Press [ (-)] or [ (+)] to select the appropriate paper size press [Set] twice.❑ Press [ (-)] or [ (+)] to select the appropriate paper type press [Set].❑ Press [Stop/Reset] to return to standby mode.IMPORTANT• Do not load different size and type of paper at the same time.• Do not load extra paper when there is still paper left in the cassette. If you load extra paper while printing, remove the loaded paper first.Then put it together with the extra paper and tap the edges. After that, reload it in the cassette.• Do not load paper from the rear of the cassette.NOTE• Select ‘ENVELOPE’ for envelopes. For details on loading envelopes in the cassette, see “Loading Envelopes in the Cassette,” on p. 4-5.• For information on how to use non-standard size paper, see “Loading Paper in the Multi-Purpose Feeder,” on p. 4-8, or “Loading anEnvelope in the Multi-Purpose Feeder,” on p. 4-9.• You must set the paper size and type from the operation panel.Loading Envelopes in the Cassette1 Arrange the stack of envelopes on a firm, clean surface, and press down firmly on the edges to make the folds crisp.Press all the way around the envelopes to remove any curls and expel air from inside the envelopes. Also, press firmly on the area thatcorresponds to the edges of the back flap.HOOKSLOAD LIMITMARKHOOKHOOK
