Paper Handling4Loading Paper4-102 Insert the envelope straightly in the multi-purpose feeder with the print side up and the right edge (i.e., closer to the stamp)first.Envelopes with a flap on the short edge cannot be used.3 Specify the paper size.❑ Press [Menu] press [Set].❑ Press [ (-)] or [ (+)] to select <2.MP TRAY> press [Set] twice.❑ Press [ (-)] or [ (+)] to select press [Set].❑ Press [ (-)] or [ (+)] to select the appropriate envelope type press [Set] twice.NOTEYou can select instead of as the paper size. When is selected, you can specify vertical andhorizontal sizes of the envelope in the following ranges:- : 127 mm to 356 mm (5” to 14”)- : 76 mm to 216 mm (3” to 8 1/2”)4 Specify the paper type.❑ Press [ (-)] or [ (+)] to select or press [Set].❑ Press [Stop/Reset] to return to standby mode.Testing the MachineAfter you have assembled your machine, installed the toner cartridge, loaded paper, you can make sure the machine isprinting properly by making several copies of a document. For instructions, see Chapter 10, “Making Copies.”Note the following:• If the printed sheets are curled as they exit the machine, remove them from the output slot immediately to avoid paperjams.• Make sure your text or graphics fall within the printable area.
