30 Printing from the Standard Paper CassetteCancelling a print jobWhen you cancel a print job, one of the following two cases will apply.Case 1:After you cancel a print job from your software application, the printer may still havedata remaining in the printer memory. Follow the procedure below to cancel a printjob from the printer control panel and clear all print data from the printer memory.1 Cancel the print job with your software application. For details, refer to your softwareapplication user’s guide.If you do not take care to stop the flow of data from the host computer, theprinter will continue to print out any data it receives after READY hasappeared.2 Press Go to take the printer off-line.3 Press Menu until you see RESET MENU. Press Item and then Value to selectRESET=PRINTER or RESET=MENU and press Enter. This clears all data from theprinter memory.4 Press Go to put the printer back on-line.Case 2:To cancel a job while the printer is off-line and PAUSED message is displayed, pressEnter while holding down Shift.
