80 The Standard Printing Environment SettingsPCL The printer is dedicated to the PCL personality and will not switchto the PostScript personality automatically if it receives a PostScriptprint stream. However, special commands sent to the printer withthe print stream can force the printer to switch to the PostScriptpersonality.I/O TIMEOUT (input/output timeout) is the amount of time (measured in seconds)that the printer waits for more data before it ends a print job. If data from other portsfrequently arrive in the middle of a print job, increase the setting.This timeout setting is for the optional interface port only. You can also set the timeoutfor the parallel interface (see page 78).15 The timeout is set for 15 sec.5 to 3000 To increase the number, press Value; to quickly scroll to a highernumber in increments of 10, press and hold down Value.To decrease the number, press Shift and Value; to quickly scrollback to a lower number in decrements of 10, press and hold downShift and Value.In addition to the items above, this menu allows you to set the followingfour network settings:IP ADDRESSSUBNET MASKGATEWAY ADDRESSMAC ADDRESSPlease consult the Getting Started Guide for detailed information onconfiguring the settings.I/O TIMEOUT=15 *
