387 Press Item until you see TRAY SWITCH to make sure it is on. If it is not, press Valueuntil you see ON and press Enter.8 Press Item until you see MPTSIZE.For manual feed, you have to set the paper size for the tray because the trayhas no paper size sensor.9 Press Value until you see the paper size you want. Then press Enter.10 Press Go to put the printer back on-line.11 Open the tray and load one sheet of letterhead with the print side face-up and the topof the page inserted into the printer.12 Start to print with the software application. The printer will take the first sheet fromthe tray and will automatically feed remaining sheets from the standard paper cassette.13 Close the tray.For frequent printing of letters, you may want to leave the printer in thissetting. The printer will always check the tray first. If no paper is loaded,the printer will select the standard paper cassette.Printing from the Multi-Purpose TrayFEEDER MENUTRAY SWITCH=ON *FEEDER MENUMPTSIZE=LETTER *FEEDER MENUMPTSIZE=A4 *
