66When the selected font is a bitmap or fixed spacing font, this item will notappear for selection.12.00 The printer font source is set for 12-point.4.00 to 999.75 To increase the number in increments of 0.25, press Value. Toquickly scroll through the numbers in increments of 1.00, holddown Value.To decrease the number in decrements of 0.25, press Shift andValue, or press and hold Shift and Value to quickly scrollbackwards in decrements of 1.00.PITCH appears only if the font source you selected with FNTSRC (font source) andFONTNUM (font number) above is a scalable font in a fixed pitch typeface. Use thisitem to set the pitch of the font. Pitch is measured as the number of equally spacedcharacters per inch.10.00 The selected pitch is 10 characters per inch.0.44 to 99.99 To increase the number in increments of 0.01, press Value. Toquickly scroll through the numbers in increments of 1.00, press andhold down Value.To decrease the number in decrements of 0.01, press Shift andValue, or press and hold Shift and Value to quickly scrollbackwards in decrements of 1.00.PITCH is only displayed when the font is Scaled Fixed Space.SYMSET (symbol set) allows you to select the symbol set, a collection of letters,numbers, punctuation marks and special symbols.Appendix 2 (see page 168) of this guide shows the names of internal symbol sets youcan select.If the currently selected font does not support the orientation or symbol set you’veselected, the control panel font selection returns to the factory default setting.PCL MENUPITCH=10.00 *PCL MENUSYMSET=ROMAN-8 *The Standard Printing Environment Settings
