72CONFIG MENUShaded menus appear after an option has been installed. E.g. A5 module with theAdobe PostScript 3 software or Network cards.If there is insufficient memory, MEMCONFIG may not appear, even after the A5module has been installed.Press Go to take the printer off-linePress Menu to display the first menu nameJam recovery allows printing to resume automatically once a paper jam has beenremoved. Jam recovery can be set for PCL and PostScript personalities.OFF The printer does not resume printing automatically after the paperjam has been removed. You must start the print again. You maywant to use this setting to conserve memory.ON The printer reserves enough memory to hold the data for the pagethat jams and automatically reprints the page that jammed. Withthis setting, printing speed is slightly slower. Use this setting ifthere is sufficient memory available.AUTOCONT (automatic continue) determines how the printer reacts to errors. If theprinter is part of a network or remote spooling system, then set AUTOCONT=ON.ON The printer displays a message, goes off-line for about 10 secondsand then automatically goes back on-line and resumes printing.OFF The printer displays a message, goes off-line and waits for you tocorrect the problem. Press Go to resume operation.The Standard Printing Environment SettingsCONFIG MENUJAMRECOVERY=OFF *CONFIG MENUAUTOCONT=ON *
