Chapter 99-19.1 Control Panel9.1.1 Outline 0012-7126LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLThe machine's control panel consists of the following PCBs, and is controlled by the ASIC of the image processor PCB.F-9-19.2 Fan9.2.1 Outline 0011-5769LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLThis machine has a fan on the rear side to discharge the hot air around the fixing unit and cool the laser scanner unit and electric elements on PCBs. The fan iscontrolled by the CPU on the DC controller PCB. Its operating conditions are as follows:1. During normal rotation, in the fixing cleaning mode (user mode), or after paper has reached the registration clutch2. During transfer roller cleaning (user mode) or after operation of the main motor1. After post-rotation, after completion of the cleaning mode, or 30 seconds after stop of the main motor2. After stop of the main motor due to opening of a door or occurrence of a jam or other failuresThe CPU on the DC controller CPU outputs a Fan Drive signal (FANON = 'H') to turn the fan.The CPU judges that a fan failure has occurred if it detects a Fan Lock Detection signal (FANLOCK = 'H') during fan rotation.F-9-2ASICCPULEDLCDKey SWImage processorPCB Control panel PCBFM1Fixing unitDownload Free Service Manual And Resetter Printer at http://printer1.blogspot.com