Chapter 1414-101: FOOLSCAP2: OFFICIO3: E_OFFICIO4: G_LTR_R5: A_LTR_R14.5 Printer Function Settings (PRINTER)14.5.1 Service Soft Switch Settings (SSSW)14.5.1.1 SSSW-SW0514.5.1.1.1 List of Functions0011-4190LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLT-14-1514.5.1.1.2 Detailed Discussions of Bit 70011-4191LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLUse it to enable/disable placement of priority on recording in sub scanning direction.T-14-16*: Image B4 or shorter and that cannot be printed by division and on A4 recording paper.14.5.1.2 SSSW-SW1414.5.1.2.1 List of Functions0011-4192LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLT-14-1714.5.1.2.2 Detailed Discussions of Bit 00011-4193LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLSelect whether to enable or disable transfer bias pressure reduction mode.Select "Enable" to avoid image defects (black spots) produced by transfer bias leaks occurring in a low-pressure region, such as one at a high altitude. This settingregulates the transfer bias to keep it from exceeding a predetermined level during printing.14.5.1.2.3 Detailed Discussions of Bit 20011-4194LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLSelect whether to enable or disable black belt addition mode. If the user uses paper that causes fixed toner on paper to be fused and adhered to drum, selecting"Yes" will clean the drum by forming a black band on the drum surface during the reverse rotation which is performed after printing on 50 sheets.14.5.1.2.4 Detailed Discussions of Bit 40011-4195LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLSelect whether to enable or disable flicker reduction mode. Select "Enable" and enter a count to modify fusing temperature control to cancel fluorescent flickingBit Function 1 00 not used - -1 not used - -2 not used - -3 not used - -4 not used - -5 not used - -6 not used - -7 priority on recording in sub scanning direction place do not placeplace: if B4 recording paper and A4 recording paper are set and an A4 extra-long image(*) is received, printing will be on the B4 recording paper.do not place: if B5 horizontal recording paper and A4 recording paper are set and a B4 image isreceived, printing will be by division and on B5 horizontal recording paper.Bit Function 1 00 Transfer bias pressure reduction mode Enable Disable1 Not used - -2 Black belt addition mode Enable Disable3 Not used - -4 Flicker reduction mode Enable Disable5 Silent mode Enable Disable6 Terminal temperature rise Not used - -7 Pre-rotation extension mode Enable DisableDownload Free Service Manual And Resetter Printer at http://printer1.blogspot.com