Canon MF6500 Series Service Manual

Also see for imageCLASS MF6500 Series: Basic guide Starter Guide Driver guide Advanced guide Software guide

Contents

Chapter 11-14When cleaning the fixing pressure roller, manually feed A4 paper.MEMO:The time required for cleaning is about 100 seconds.1) Press the user mode key " " to enter the user mode.2) Using the left an right arrow keys, display the "ADJUST./CLEANING" menu.3) Press the OK key.4) Using the left and right arrow keys, select "FIX. UNIT CLEANING".5) Open the manual feed tray.6) Place an A4 or LTR sheet of plain paper in the manual feed tray.F-1-137) Select the paper size, press the OK key.8) Select the paper type, press the OK key. The machine will start cleaning the fixing pressure roller.4.Cleaning the Transfer RollerIf the reverse side of the printed paper is stained, the transfer roller can be dirty. If the reverse side of the printed paper is stained, clean the transfer roller in the usermode.1) Press the user mode key " " to enter the user mode.2) Using the left and right arrow keys, display the "ADJUST./CLEANING".3) Press the OK key.4) Using the left and right arrow keys, select "TRANS. ROLR CLEAN". Next, press the OK key. Cleaning will start.5. Cleaning the ADF rollerIf black streaks are seen on the printed paper from the ADF, the internal roller in the ADF can be dirty. If this symptom occurs, clean the internal roller in the usermode.) Press the user mode key " " to enter the user mode.2) Using the left and right arrow keys, display the "ADJUST./CLEANING" menu.3) Press the OK key.4) Using the left and right arrow keys, select "FEEDER CLEANING".5) Load five sheets of paper in the ADF and pres the OK key. Cleaning will start.1.2.5 Safety1.2.5.1 Safety of the Laser Light 0011-3531LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLLaser light can prove to be hazardous to the human body. The machine's laser unit is fully enclosed in a protective housing and external covers so that its light willnot escape outside as long as the machine is used normally.1.2.5.2 Safety of Toner 0011-3534LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLThe machine's toner is a non-toxic material made of plastic, iron, and small amounts of dye.Do not throw toner into fire. It may cause explosion.Toner on Clothing or Skin1. If your clothing or skin has come into contact with toner, wipe it off with tissue; then, wash it off with water.2. Do not use warm water, which will cause the toner to jell and fuse permanently with the fibers of the cloth.3. Do not bring toner into contact with plastic material. It tends to react easily.1.2.5.3 CDRH Regulations 0011-3532LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLThe Center for Devices and Radiological Health of the US Food and Drum Administration put into force regulations concerning laser products on August 2, 1976.These regulations apply to laser products manufactured on and after August 1, 1976, and the sale of laser products not certified under the regulations is bannedwithin the Untied States. The label shown here indicates compliance with the CDRH regulations, and its attachment is required on all laser products that are soldin the United States.Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com