Chapter 1414-8If any operation error occurs after changing the setting value, change the setting value to the original one.14.4.2 <024:CIS scan position during ADF scanning> 0011-4166LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLThis value is used when automatic scan position adjustment (TESTMODE>"2"SCAN TEST>"3"SHEET POS ADJ) fails.14.4.3 <026:Distance from the standby position of CIS to the shading start point> 0011-4167LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLWhite shading can be adjusted finely.Normally, do not change the setting value. If any operation error occurs after changing the setting value, change the setting value to the original one.14.4.4 <031Vertical scan start position adjustment> 0011-4168LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLAdjust the position at which vertical scanning of a book starts. The larger the adjustment value, the narrower the left-side margin of the image becomes.14.4.5 <032Horizontal scan start position adjustment> 0011-4169LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLAdjust the position at which horizontal scanning of a book starts. The larger the adjustment value, the narrower the top margin in the image becomes.14.4.6 <033Vertical scan magnification correction> 0011-4170LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLCorrect the magnification of vertical scanning of a book. The larger the adjustment value, the more the image stretches in the vertical scanning direction.14.4.7 <034Horizontal scan magnification correction> 0011-7354LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLCorrect the magnification of horizontal scanning of a book. The larger the adjustment value, the more the image stretches in the horizontal scanning direction.14.4.8 <035: - 036:Reader motor speed change> 0011-4176LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLThough no market adjustment work needs to be carried out, enter factory defaults at image processor PCB replacement.14.4.9 <041: Vertical scan start position adjustment (when scanning on a document fed from ADF)> 0011-4177LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLAdjust the position at which vertical scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the left-side margin of theimage becomes.045: Horizontal scan end position correction(fine:scanning on ADF)75 0-200 one unit=0.1mm046: Horizontal scan end position correction(standard:scanning on ADF)75 0-200 one unit=0.1mm047: Vertical scan magnification correction (scanningon ADF)32 0-32 one unit=0.1%048: Horizontal scan magnification correction(scanning on ADF)32 0-32 one unit=0.1%049: - 053: Not used054: Pickup motor speed correction (when the ADF isused)32 0-32 one unit=0.1%055: - 192: Not used193: ADF special paper, standardized size: LGLmisidentification-ready0 0 : LEGAL1 : FOOLSCAP2 : M_OFFICIO3 : A_FOOLSCAP4 : FOLIO5 : G_LEGAL6 : A_OFFICIO7 : B_OFFICIO194: ADF special paper, standardized size: LTRmisidentification-ready0 0 : LTR1 : G_LTR2 : A_LTR195: ADF special paper, standardized size: LTR_Rmisidentification-ready0 0 : LTR_R1 : FOOLSCAP2 : OFFICIO3 : E_OFFICIO4 : G_LTR_R5 : A_LTR_R196: - 350: Not usedNo. Function Default Setting range UnitDownload Free Service Manual And Resetter Printer at http://printer1.blogspot.com