Canon MF6500 Series Service Manual

Also see for imageCLASS MF6500 Series: Basic guide Starter Guide Driver guide Advanced guide Software guide

Contents

Chapter 1414-414.1.7.2 Detailed Discussions of Bit 2 0011-4109LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLUse it to specify whether to convert or not convert an inch-configuration resolution into a millimeter-configuration resolution for image read in G3 transmission:either in sub scanning direction only or in both main and sub scanning directions. The setting is valid only when bit 1 of SW05 of #SSSW is set to '1'.14.1.7.3 Detailed Discussions of Bit 4 0011-4111LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLUse it to specify whether to declare or not declare an inch-configuration resolution to the other machine for G3 communication: if 'declare' is selected, the machinewill indicate that it reads and records at an inch-configuration resolution using the DIS, DCS, or DTC signal.14.1.8 SSSW-SW2814.1.8.1 List of Functions 0011-4112LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLT-14-1114.1.8.2 Detailed Discussions of Bit 0 0011-4113LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLSelect whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is inhibited at calling and the V.21 protocol is used.14.1.8.3 Detailed Discussions of Bit 1 0011-4114LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLSelect whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is inhibited when called and the V.21 protocol is used.14.1.8.4 Detailed Discussions of Bit 2 0011-4115LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLIf ANSam signal is not received during transmission, select whether to use the V.8 protocol when the other fax machine declares the V.8 protocol in DIS signal. IfNO is selected, the CI signal is not transmitted and the V.8 protocol is not used even if the DIS that specifies the V.8 protocol is received.The V.8 late start is not executed during manual transmission regardless of this setting.14.1.8.5 Detailed Discussions of Bit 3 0011-4116LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLSelect whether to declare the V.8 protocol in DIS signal for reception. If NO is selected, the V.8 protocol cannot be used because it is not declared in DIS signal.The V.8 late start is not executed during manual reception regardless of this setting.14.1.8.6 Detailed Discussions of Bit 4 0011-4117LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLSelect whether the receiver falls back during V.34 reception. If 'Prohibit' is selected, the receiver does not fall back.14.1.8.7 Detailed Discussions of Bit 5 0011-4118LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLSelect whether the transmitter falls beck during V.34 transmission. If 'Prohibit' is selected, teh transmitter does not fall back.14.1.9 SSSW-SW3014.1.9.1 List of Functions 0011-4123LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLT-14-12Bit Function 1 00 Caller V.8 protocol NO YES1 Called party V.8 protocol NO YES2 Caller V.8 protocol late start NO YES3 Called party V.8 protocol late start NO YES4 V.34 reception fallback Prohibited Not prohibited5 V.34 transmission fallback Prohibited Not prohibited6 not used - -7 not used - -Bit Function 1 00 Not used - -1 Not used - -2 Not used - -3 Not used - -4 Not used - -5 New dial tone detection method Detect with the newmethod.Detect with theexisting method.6 Not used - -Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com