Chapter 1414-114.1 Service Soft Switch Settings (SSSW)14.1.1 SSSW-SW01:14.1.1.1 List of Functions 0011-4093LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLT-14-114.1.1.2 Detailed Discussions of Bit 0 0011-4094LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLSelects whether or not service error codes are output.When output is selected, service error codes is report.14.1.2 SSSW-SW0314.1.2.1 List of Functions 0011-4095LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLT-14-214.1.2.2 Detailed Discussions of Bit 7 0011-4096LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLUse it to enable/disable transmission of a 1080-Hz tonal signal before transmission of the CED signal.Select 'transmit' if errors occur frequently because of an echo when reception is from overseas.Memo:Any of the following error code may be indicated because of an echo at time of reception##0005, ##0101, ##0106, ##0107, ##0114, ##0200, ##0201, ##079014.1.3 SSSW-SW0414.1.3.1 List of Functions 0011-4097LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLT-14-314.1.3.2 Detailed Discussions of Bit 2 0011-4098LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLUse it to select the number of last flag sequences for a protocol signal (transmission speed at 300 bps). Select '2' if the other party fails to receive the protocol signalproperly.Memo:Bit Function 1 00 service error code output not output1 not used - -2 not used - -3 not used - -4 not used - -5 not used - -6 not used - -7 not used - -Bit Function 1 00 not used - -1 not used - -2 not used - -3 not used - -4 not used - -5 not used - -6 not used - -7 tonal signal before CED signal transmission transmit do not transmitBit Function 1 00 not used - -1 not used - -2 the number of final flag sequences of protocol signals 2 13 Reception mode after CFR signal transmission high speed high speed/low speed4 the length of the period of ignoring low speed signals afterCFR output1500 ms 700 ms5 not used - -6 CNG signal for manual transmission Not transmitted Transmitted7 CED signal for manual reception Not transmitted TransmittedDownload Free Service Manual And Resetter Printer at http://printer1.blogspot.com
