6-12 Speed Dialing Chapter 6Using Group DialingTo use this feature, you must first register a group of fax numbers for one-touch orcoded speed dialing. (1 p. 6-9)Follow this procedure to send a document to a group of destinations registered under aone-touch speed dialing button or coded speed dialing code:1 Open the document tray.2 Adjust the document feed lever for thedocument you are loading. (2 p. 4-2)3 Prepare the document and load it, facedown, in the ADF. (2 p. 4-3)• For color sending, press Color/B&W to (Currently used memory)turn on its light. (1 p. 7-2)• To adjust the resolution and contrast,1 pp. 7-2, 7-4. (Standby to scan)4 Enter the group registered under a one-touch speed dialing button or coded speeddialing code.z To enter a group registered under a one-touch speed dialing button:Press the one-touch speed dialing buttonassigned to the group you wish to fax.• If you press the wrong button, press Stop,then press the correct button.z To enter a group registered under a codedspeed dialing code:Press , then use the numeric buttons to Ex:enter the two-digit code assigned to the groupyou wish to fax.• If you enter the wrong code, press Stop. Thenpress Coded Dial and enter the correct code.5 Press to begin scanning for sending,or wait a few seconds for the MultiPASS tobegin scanning automatically.• If you prefer the MultiPASS never to scan adocument automatically after a few seconds,disable the TIME OUT setting. (1 p. 14-5)StartTEL=GROUP DIALA21=Coded DialTEL=GROUP DIALDOCUMENT READYMEMORY USED 0%
