3. Removing the Blank Shutter Solenoid1) Remove the blank exposure lamp assembly.2) Remove the blank exposure assembly upper plate. (See 2. “Removing the BlankExposure Lamp.”)3) Remove the screw q and the spring w; then, detach the link arm e from the blankshutter.Figure 4-3134) Remove the two screws r, and disconnect the connector t; then, remove the blankshutter solenoid y by lifting it.Figure 4-314CHAPTER 4 IMAGE FORMATION SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 4-31q w et r yDownload Service Manual And Resetter Printer at http://printer1.blogspot.com
