CHAPTER 1 GENERAL DESCRIPTIONCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-17C. User ModeTo start User Mode, press key.To select a mode, press the number (keypad) and the OK key in sequence.To change the setting, press the Zoom (+) / Zoom (-) key and OK key.• Press the clear key to clear a setting entered by mistake when making modesettings.The following modes may freely be made use of by the user:1. Specifications2. Adjustment/Cleaning1. SpecificationsFunctionChanging the auto cleartimeChanging the autopower-off timeSetting pre-heat modeTurning on or offcassette selectionTurning on or off manualpaper size registrationDisplay DescriptionUse it to set the auto clear timebetween 0 and 9 min in 1-minincrements. Setting it to 0 mindisables the function.Use it to change the auto power-offtime between 10 and 120 min in10-min increments.Use it to specify a percentage atwhich the power consumption isreduced in pre-heat mode.0%: no power saving-10%: 10% saving.-25%: 25% saving.-50%: 50% saving.Use it to turn on or off autocassette selection (APS)/autopaper change (ACC) for eachcassette and multifeeder:ON: Enable APS/ACC.OFF: Disable APS/ACC.Use it to specify whether papersize should be stored at time ofsetting paper or pressing the CopyStart key for the multifeeder:ON: At time of settingpaper.(multifeeder istargeted for selection in theAPS/ACC and auto zoommode.)OFF: At time of pressing CopyStart key.Default settings2 min60 min-10%ON(Multifeeder isOFF)OFFDownload Service Manual And Resetter Printer at http://printer1.blogspot.com
