CHAPTER 5 PICK-UP/FEEDING SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 5-472. Removing the Pick-Up Assembly1) Remove the cassette from the copier.2) Remove the multifeeder inside cover and the right cover.3) Remove the front right cover.4) Disconnect the two connectors q of the lifter motor.5) Remove the four screws w, and remove the cassette lifter motor assembly e.Figure 5-7036) If a pedestal is used, open the pedestal right door, remove the screw r and the leafspring t, and shift the registration guide y to the outside.Figure 5-704weqweqt r yDownload Service Manual And Resetter Printer at http://printer1.blogspot.com
