1-18CHAPTER 1 GENERAL DESCRIPTIONCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)FunctionTurning on or off autosortingChanging default bindingmargin widthTurning on and off backbinding margin onlySwitching betweenmillimeter and inchnotationsSetting auto energysaver modeResetting user modeStoring standard modeResetting standardmodeDisplay DescriptionUse it to enable or disable auto-matic sorting for multiple originals:ON: Enable auto sorting.OFF: Disable auto sorting.Use it to set the default width forthe binding width between 1 and20 mm in 1-mm increments.Use it to allow or not allow a backbinding margin when making one-sided copies of two-sided originalsand two-sided copies of one-sidedoriginals with a binding margin:ON: Allow binding margin onback only.OFF: Allow binding margin.Use it to select between millimeterand inch notations as the unit ofinput length:-1: in millimeters-0: in inchesUse it to set the time for entering toanto energy saver mode.The time can be set between 15and 90 min in 15-min increments.Use it to reset user mode settingsby selecting “on” and pressing theOK key.Use it to store the mode to beselected in response to the Resetkey by selecting “on” and pressingthe OK key.Use it to reset the standard modeto default (factory)* 1 settings byselecting “on” and pressing the OKkey.Default settingsON10 mmOFFmm15 minOFFOFFOFF*1 : Factory modeDensity : AE (Automatic Exposure)Paper selection : Auto Paper SelectionCopy count : 1Ratio : Direct (100%)Paper output : Non-sortDownload Service Manual And Resetter Printer at http://printer1.blogspot.com
