6. Adjusting the Pressure of the Separation RollerIf double feeding or pick-up failure occurs frequently during pick-up operation, adjustthe position of the pressure spring for the separation roller.q if double feeding is frequent, move the hook of the spring toward A.w if pick-up failure is frequent, move the hook of the spring toward B.Figure 8-6397. Position of the Pick-Up Roller Release Solenoid (SL1)Attach the solenoid so that the pick-up roller arm q butts against the upper stay wwhen the plunger of the solenoid is pushed in.Figure 8-6408-34CHAPTER 8 PAPER DECK PEDESTALCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)qwerABq Feeding rollerw Separation rollere Pressure leverr Pressure springqwButtedDownload Service Manual And Resetter Printer at http://printer1.blogspot.com