Paper-related settingsSelect this setting item from Device settings.• Roll paper auto feedEnables/disables feeding roll paper automatically when you load it on the roll unit.Selecting Enable detects the paper edge automatically and paper is loaded automatically only byputting roll paper on the roll unit.Select Disable if you load roll paper manually, or if you have any problem in feeding roll paperautomatically.• Keep media typeSelect Enable to keep using the same type of paper.• Manage remaining roll amountSelects the method to manage remaining roll amount and that to display warning when the roll isrunning short.◦ BarcodesManages remaining roll amount by using a barcode.By using the barcode every time you replace a roll, you can manage remaining roll amount properly.Specify the roll length properly when you load a new roll.◦ Warning messageEstimates remaining roll amount by using media type and roll diameter information. A warningappears when remaining roll amount comes closer to the specified value.Depending on the environment you are using the printer, selecting this setting may not manageremaining roll amount as precisely as you expected. We recommend you select a higher value forthis setting item.◦ DisableSelect to disable managing remaining roll amount.• Roll amount warning settingSpecifies when to warn the remaining roll paper amount.• Switch roll paper when lowSwitches the roll paper for printing automatically when the roll is running out while printing is in progress.◦ EnableThis setting is valid only when Barcodes is selected for Manage remaining roll amount.The roll paper for printing is switched with several rolls remaining.◦ DisableSwitches the roll paper for printing by estimating the remaining amount based on the roll amountvalue you entered.To switch the roll, several rolls need to remain in the roll.215
