Setting the Paper Rolls in the Printer According to the IntendedUseIf you want to switch the 2-level rolls, set the paper rolls on the upper and lower level of the printer in one ofthe ways described below depending on the intended use.• When automatically switching from paper roll 1 to paper roll 2 to match the paper size specified for theprint jobSet two paper rolls of the same type of paper but of different width on the upper and on the lower trays.Example of how to set the paperPaper-feeding tray Roll Width Media TypeUpper-level 24 in Roll (609.6mm) Plain PaperLower-level A1/A2 Roll (594.0mm) Plain Paper• When automatically switching from paper roll 1 to paper roll 2 role to match the paper type specified forthe print jobSet two paper rolls of the same width but of different types of paper on the upper and on the lower trays.Alternatively, set two paper rolls of different width and different types of paper on the upper and on thelower trays.Setting the paper (Example 1)Paper-feeding tray Roll Width Media TypeUpper-level A1/A2 Roll (594.0mm) Plain PaperLower-level A1/A2 Roll (594.0mm) Canon Coated PaperSetting the paper (Example 2)Paper-feeding tray Roll Width Media TypeUpper-level 24 in Roll (609.6mm) Plain PaperLower-level A1/A2 Roll (594.0mm) Canon Coated PaperImportant• 2-level roll switching is not possible when the paper rolls being fed on the platen are not compatiblewith automatic cut-off. For checking which types of paper are compatible with automatic cut-off,look up the paper you want to use on the "Paper Information List."• If Auto (Use Printer Settings) is selected for Media Type in the Main sheet, you cannot switchbetween upper and lower rolls corresponding to the media type specified by the print job. If differenttypes of roll paper are set for the upper and lower rolls, specify the media type, such as plain paperor enameled paper, in Media Type.589
