Printing Hanging and Horizontal Banners (Large-Format Printing)A drapery or banner up to 18.0m can be made by enlarging or reducing original documents made onapplication software.However, there are cases in which an 18.0 meter banner cannot be printed because the applicationsoftware used has limits on the document size that can be set.The procedure for printing hanging and horizontal banners is as follows:Print for width of roll1. Create document by using application software2. Open the printer driver setup window3. Select the paper sizeSelect the same original paper size created in the application soft in the Page Setup tab's Page Size.In the event an optional size is set in the application software, select Custom Size from CustomPaper Size in Page Size and designate size in the dialog box that appears.4. Select roll widthSelect the equivalent to the paper width of the roll set in the printer under Roll Width.5. Set Enlarged/Reduced PrintingCheck Enlarged/Reduced Printing and select Fit Roll Paper Width.When the Information dialog box appears, select the equivalent to the paper width of the roll set inthe printer.660
