Firmware updateSelect this setting item from Device settings.Important• The administrator password is required to change settings if it is enabled for changing settings usingthe operation panel.You can update the firmware of the printer, check the firmware version, or perform settings of a notificationscreen, a DNS server and a proxy server.Note• Only Check current version is available when Disable LAN is selected for Change LAN in LANsettings.• Install updatePerforms the firmware update of the printer. If you select Yes, the firmware update starts. Follow the on-screen instructions to perform update.Important• When you use this function, make sure the printer is connected to the Internet.Note• If the firmware update is not complete, check the following and take an appropriate action.• Check the network settings such as a wireless router.• If Cannot connect to the server. is displayed on the touch screen, select OK and try againafter a while.• Check current versionYou can check the current firmware version.• Update notification settingWhen Yes is selected and the firmware update is available, the screen to inform you of the firmwareupdate is displayed on the touch screen.• DNS server setupPerforms settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup,follow the display on the touch screen to perform settings.• Proxy server setupPerforms settings for a proxy server. Follow the display on the touch screen to perform settings.525
