Reflect Roll Unit Settings in the Printer DriverReflect printer unit's Roll Unit settings in the printer driver.If the printer unit settings are reflected in the printer driver, the paper that can be set in the printer driversettings will change to a status suitable to the printer unit status.The following explains the procedure to reflect Roll Unit settings in the printer driver.1. Select as described below:• If you are using Windows 10 or Windows Server 2016, select the Start menu -> WindowsSystem -> Control Panel -> Hardware and Sound (Hardware) -> Devices and Printers.The Devices and Printers window is displayed.• If you are using Windows 8.1, Windows Server 2012 R2, or Windows Server 2012, from theDesktop charms, select Settings -> Control Panel -> Hardware and Sound (Hardware) ->Devices and Printers.The Devices and Printers window is displayed.• If you are using Windows 7 or Windows Server 2008 R2, select the Start menu -> ControlPanel -> Hardware and Sound (Hardware) -> Devices and Printers.The Devices and Printers window is displayed.2. Display setup windowRight-click the "Your model name" icon, and select Printer properties.The printer's Properties window appears.3. Click the Device Settings tab's Device InformationClick Acquire Status in the displayed Device Information dialog box, and then click Yes.Printer unit settings will be reflected in the printer driver.Important• In the event the lower roll unit is not set or the roll unit is being used as a wrapping device, the valueof Roll Unit will be set to No. In this case, Automatically switch paper sources (paper sizepriority) will be grayed out and cannot be selected. Also, the Paper Source items that can beselected in the Page Setup tab will change.602
