Paper Detailed Settings dialog boxDrying TimeWait time can be set to allow ink to dry. Between Pages settings are only enabled for roll paper.Between PagesThe wait time until outputting paper can be set after printing one page. Time is taken beforecutting roll paper to allow the ink to dry, so even when Automatic Cutting in the Roll PaperOptions of the Page Setup tab is set to Yes, page may be dropped into the basket with driedink.Setting Items ContentPrinter Default Settings in printer unit control panel are applied.None Page will be output immediately after printing30sec. / 1min. / 3min. / 5min. /10min. / 30min. / 60min.Page will be output after set amount of time has passed afterprinting.Between ScansThe wait time until printing next scan can be set after printing one scan in page. Set in the eventsmudging occurs in the page, unevenness occurs in borderless printing, etc., and you would liketo avoid this smudging and unevenness.Setting Items ContentPrinter Default Settings in printer unit control panel are applied.None Next scan will be print immediately after first scan is print.0.5sec. / 1sec. / 3sec. /5sec. / 7sec. / 9sec.Next scan will be print after the set amount of time has passed afterprinting one scan.* If smudges and/or unevenness occur, please increase time.Roll Paper Safety MarginIn order for heavily curling paper to absorb well in platen, length of margin established on edge ofpaper can be selected.Leading Edge MarginRoll Leading Edge Margin length can be set.Setting Items ContentPrinter Default Settings in printer unit control panel are applied.3mm Will be print in standard size.* Please select when there are no particular problems with printing.20mm Please select when rubbing of the print heads occurs, such as when heavily curlingpaper is being used.730
