3-26Operation and Setting as AdministratorSpotThis mode meters the center part of the screen.Without being affected by brightness or darkness in outer areas of the screen, the appropriateexposure can be achieved for the subject in the center.Select this mode to adjust the exposure in the center part of the screen when the subject isunder a spotlight or in backlight.4 Shutter SpeedWhen the Exposure Mode is set to “Manual” or “Auto (Shutter Speed)”, select the shutterspeed.When “Manual” is set, select the speed between “1/1 sec” and “1/8000 sec” from the pull-down menu.When “Auto (Shutter Speed)” is set, select between “1/8 sec” and “1/8000 sec” from the pull-down menu.5 ApertureWhen the Exposure Mode is set to “Manual”,set the aperture value.The further to the left you move the slider, themore closed the aperture and the darker theimage. Conversely, the further to the right youmove the slider, the more open the apertureand the brighter the image.6 GainWhen the Exposure Mode is set to “Manual”, set the gain value.The further to the left you move the slider, the lower the gain (sensitivity for brightness) andthe darker the image. Conversely, the further to the right you move the slider, the higher thegain and the brighter the image.12125 12126NoteWhen capturing subjects like traffic lights and electronic signboards, the capturedvideo may be blinking. It may be reduced by changing the exposure mode to “Auto(Shutter Speed)” and choosing a shutter speed of 1/100 or slower.COPY
