2-5VBAdmin ToolsWhen the camera is disconnected after start up, select“Connect” from the File menu bar to display theConnection Setting dialog.Start Up VBAdmin Tools4. VBAdmin Tools startsYou can start the Panorama Creation Tool, ViewRestriction Tool, Preset Setting Tool, Motion DetectionTool, Log Viewer or Admin Viewer by clicking thebutton for each tool.Tip● Panorama Creation Tool, View Restriction Tool, Preset Setting Tool and MotionDetection Tool cannot be launched simultaneously. Log Viewer and Admin Viewercan be launched simultaneously.● When connecting to another Canon network camera other than VB-C60, you maynot be able to use some of the tools.7 FTPTo use the Panorama Creation Tool and the Log Viewer of the VBAdmin Tools, it isnecessary to connect to VB-C60 using FTP. The FTP connection mode can be selectedfrom the PASV mode or PORT mode.●Use PASV modeCheck it when selecting the PASV mode. Normally, select PASV mode. Clear the checkbox when using PORT mode.NoteNote on Windows Vista/XPIf you start up VB Initial Setup Tool on Windows Vista/XP, Windows Security Alertdialog may appear. If the dialog appears, click “Unblock”. Once you click “Unblock”,the dialog box will not appear again.3. A confirmation message is displayedClick “OK”.NoteIf connecting to the camera with specifying IPv6 address, you cannot use AdminViewers with Internet Explorer.COPY
