1-12Set the Date and Time (Date and Time)2 Date, TimeConfigure the following settings depending on the 1 “Setting Method”.Set manuallyManually enter the date and time in “Year/Month/Day” format for the date and in “hh:mm:ss”format for the time. Use 2 digits for the month, day and time.Example: Enter “2008/08/23” and “13:23:04” for 1:23:04 PM, August 23 2008.Synchronize with NTP serverEnter the NTP server IP address, so that the time is synchronized with the NTP server’stime.Synchronize with NTP broadcastThe time is synchronized with the NTP broadcast’s time.Synchronize with computer timeThe time is synchronized with the date and time of the computer currently accessing thecamera. The time zone is also automatically selected.3 Time ZoneSelect the appropriate time zone.Tip● After applying the settings by clicking “OK”, “Setting Method” is automatically setto “Set manually”.● When “Synchronize with NTP server” is selected, if the camera cannot connect tothe NTP server because of the wrong IP address of the NTP server or other reasons,the date and time will not be changed.● The Time Zone does not support Daylight Savings Time.COPY
