1-5Detailed SettingsAccess the Setting Menu■ Apply ChangesWhen you change the settings on each setting page, the grayed-out “OK” button on the top rightof the page changes to blue.Click “OK” to enable the changes.Click “Clear” to reset the changes.■ Setting Items That Require RebootAn orange mark is indicated for each setting item that requires rebooting the camera to enable thechange.When you change a setting item with the orange mark, the “OK” button displayed on the top rightof the setting page changes to “OK and Reboot”.Click “OK and Reboot” to enable the change. The setting changes and then the camera reboots.Click “Clear” to reset the changes.Common ItemsTip● A dialog box appears to alert when clicking “OK” or “OK and Reboot” after changingthe network setting, in which the currently-used browser becomes unable to accessto the camera.● If the above network setting is changed and so the viewer cannot reconnect to thecamera automatically, links to candidate URIs are displayed. However, you maynot be able to connect using the URI, as these are just candidate URIs. In suchcase, try connecting from VB Initial Setup Tool.COPY
