2-13VBAdmin Tools4 ModelDisplays the model of the camera that is currently connected.5 Apply the view restrictionCheck the checkbox to enable the view restriction area.6 View Restriction Value Input boxes and Get value buttonYou can change the values by entering numeric values in the View Restriction Value Inputboxes. You can retrieve the current camera angle into each setting values by clicking “Getvalue”.●View restriction setting valuesUpper value .. Value for the upper limit of the view restriction. The upper value of the selectedcamera angle is obtained using the “Get value” button.Lower value .. Value for the lower limit of the view restriction. The lower value of the selectedcamera angle is obtained using the “Get value” button.Left value ...... Value for the left limit of the view restriction. The left value of the selectedcamera angle is obtained using the “Get value” button.Right value .... Value for the right limit of the view restriction. The right value of the selectedcamera angle is obtained using the “Get value” button.Telephoto ...... Value for the telephoto limit of the view restriction The zoom value of theselected camera angle is obtained using the “Get value” button.Wide-angle .... Value for the wide-angle limit of the view restriction. The zoom value of theselected camera angle is obtained using the “Get value” button.7 Apply buttonUses this button to apply the current view restriction settings to VB-C60. Using this buttondoes not save the values to VB-C60. Be sure to use “Save View Restriction”.8 Preview buttonUses this button to reflect the values in the View Restriction Value Input boxes to the ViewRestriction Preview frame.9 Admin Viewer buttonStarts the Admin Viewer.0 Status ListDisplays the results of operation of this tool. Warning messages are displayed in blue anderror messages are displayed in red.NoteClicking “Apply” does not save the edited values to VB-C60. Click “Save ViewRestriction” to enable the changed values.View Restriction ToolCOPY
