1-17Detailed Settings▼Camera Position Control1 Restricted to PresetsSelect whether or not to restrict the camera control to presets from “No Restriction” and “PresetOnly”. When “Preset Only” is selected, the camera control is restricted to preset angles onlyfor all users except the administrator.▼Installation Conditions1 DomeSelect whether or not to use a dome. When you use the camera with a dome housing, select “Used”.2 LED SettingSelect whether or not to light the LED on camera’s head arm from “Turn On” and “Turn Off”.Select “Turn OFF” when the LED light is not needed or it can interfere monitoring, for example,when you use the camera with an optional indoor dome housing (VB-RD51S-C/S) or whenreflected LED lights may be gotten into the shooting frame.3 MountSelect the camera mount type. The factory default setting is Inverted.Set the Camera Control and External Device Names (Camera)Note● Operation of the day/night switching function should be tested thoroughly beforeusing “Day/Night” in the “Auto” mode.● When using “Day/Night” in the “Auto” mode, “AE Mode” should be set to “Auto” orFlickerless” (➞ P.3-25).● When using the camera with IR light, “Day/Night” should be set to “Manual”. IRlight cannot be used in the “Auto” mode.● While using “Day/Night” in the “Auto” mode, the IR cut filter may be inserted andremoved several times, at the time of switching day mode and night mode. In themeanwhile, Pan, Tilt, Zoom and Manual focus do not operate.Tip● Even when “LED Setting” is set to “Turn off”, the LED will turn on once when thecamera is started.● The image for the Inverted “Mount” type shows the conditions with the cover for aceiling mount (The ceiling mount cover is option).1212112122121231212112122COPY
