179The Camcorder’s Wi-Fi Functions* To use the Monitor while Out Function, an access point compatible with UPnP(Universal Plug and Play) and an Internet connection that can acquire global IPaddresses are required.1 Activate the [Monitor while Out] function.• The first time you activate the function, you will need to set apassword and the port to be used by this function (steps 2 to 4).If you have already completed the settings for the Monitor whileOut function, skip to step 5.2 Touch [OK] to open the settings screen.3 To enter the [Password] field, touch [Not configured]. Enter aunique password for the Monitor while Out function andtouch [OK].• The password is required for this function and must be between4 and 8 characters long. We recommend using an 8-characterpassword using a mix of numbers and uppercase/lowercase let-ters.• To enter the password (and the port number in the next step),use the virtual keyboard (A 183).4 To change the port number to be used, touch [80]. Enter adifferent port number and touch [OK] twice.• By default, the port number is set to 80 but you can change it ifnecessary.0 > [ Remote Control+Streaming] > [ Monitor whileOut] > [OK]Downloaded From VideoCamera-Manual.com Manuals
