261Trouble?LCD Screen has been dimmed Use the [LCD Backlight] setting tochange the brightness- Change the 1 > t > [LCD Backlight] setting to [Normal] or[Bright].May not be possible to record movies on this memory card- You may not be able to record movies on a memory card without aCLASS rating or with one rated CLASS 2. Replace the memorycard with one rated CLASS 4, 6 or 10.D Mem. Card Number of scenes already at maximum- The memory card already contains the maximum number ofAVCHD scenes (3,999 scenes); no further scenes can be copiedonto the memory card. Delete some scenes (A 73) to free somespace.Mem. Card Unable to recognize the data- The memory card contains scenes recorded using a video config-uration that is not supported (PAL or SECAM). Play back therecordings in the memory card with the device originally used torecord them.Memory card cover is open- After inserting a memory card, close the memory card slot cover.Memory card is full- Delete some recordings (A 73) to free some space or replace thememory card.Memory card is write-protected- The LOCK switch on the memory card is set to prevent accidentalerasure. Change the position of the LOCK switch.Downloaded From VideoCamera-Manual.com Manuals
