266Trouble?D List of Messages for Wi-Fi FunctionsRefer also to the instruction manual of the access point and otherdevices you will use.Another user is already controlling the camcorder. Try again later.- This message appears on the screen of the Wi-Fi device. MultipleWi-Fi devices are trying to connect with the camcorder. Make sureonly one Wi-Fi device is trying to connect and then touch Retry.Cannot transfer files.- There was a problem when transferring files to the optional CS100Connect Station. Check if any errors have occurred with the con-nect station. For details, refer to the instruction manual of theCS100.- Try turning off the camcorder and connect station. After amoment, turn them on again and restore the connection. If theproblem persists, contact a Canon Service Center.Closing the LCD panel turns off the camcorder. File transfers inprogress will be interrupted.- Keep the camcorder’s LCD panel open while a wireless file transferto the optional CS100 Connect Station is in progress.Invalid port number. Perform the setting again.- The port number entered cannot be used. In the settings for theMonitor while Out function (A 179) change the port number to aport that does not conflict with other devices.IP address conflict- Change the IP address of the camcorder or of any conflictingdevice to avoid the same IP address being assigned to multipledevices on the same network.Downloaded From VideoCamera-Manual.com Manuals
