254Trouble?- Wi-Fi networks with a stealth function that do not broadcast theirnetwork name (SSID) will not be detected by the camcorder duringthe Wi-Fi network setup. Perform the setup manually (A 206) orturn off the stealth function of the access point.Wireless playback on a computer or similar device is not smooth.- Playback may not be smooth depending on the access point’s set-tings and capabilities. Try using the camcorder closer to the accesspoint and remove any obstructing objects or obstacles betweenthem.- Connect the computer to the access point using a LAN cable.- Turn off the wireless functions of nearby wireless devices other thanthe computer or similar device being used for playback.- Switch the wireless access point to IEEE 802.11n. Refer to itsinstruction manual for details.- If these do not solve the issue, the cause may be due the device orconditions unique to the surrounding area. Use the supplied HighSpeed HDMI cable to connect the camcorder to a TV (A 151).The wireless connection was interrupted while transferring files.- Incomplete files may remain at the transfer destination. If incom-plete files remain at the transfer destination, check the content andmake sure they are safe to delete before deleting them.- Select [New Files] and perform the file transfer again.Cannot complete a wireless connection to the camcorder.- Resetting the camcorder’s settings using 1 > q > [ResetAll] will reset the camcorder’s SSID (network name) and change thenetwork passwords. Erase the camcorder’s previous network set-tings from the iOS or Android device and connect the device to thecamcorder again.Downloaded From VideoCamera-Manual.com Manuals
